for the production of auger spiral
CNC machines
Increased production profitability by reducing downtime by 79%
Reduction of current production costs (1.5 million USD per year) and risks of breakage of the used screws
Possibility to manufacture ideal augers of any size and configuration
Reducing the time needed to manufacture an auger
KZ
EU
/
advantages of our machines
When working on our machines, you can use steel of any grade
Fine tuning
The geometry of the coil is perfectly precise, without deviations in size or configuration.
CNC complex
The equipment operates under numerical control, which eliminates any errors.
The machines are universal and suitable for operation by operators with either right or left hand.
Control for left and right handed operators
Automatic calculation of parameters
The program instantly calculates the required parameters of the auger segment based on the data entered by the operator
Without changing the matrix, it is possible to produce any number of different screw segments
One matrix
Frame with 5-fold safety factor
The machine is capable of withstanding heavy loads under intensive operating conditions without the slightest damage.
The outer diameter of the auger thread can be anything - there are no restrictions.
Coils of any diameter
Ease of use
The equipment operates at maximum efficiency with minimal effort from the operating personnel.
Equipment Catalog
Maximum short-term effort
20 tons
Power consumption
3 kW
Overall dimensions of the press, L/W/H
1656 mm/
803 mm /
1138 mm
803 mm /
1138 mm
Maximum short-term effort
40 tons
Power consumption
7,5 kW
Overall dimensions of the press, L/W/H
1856 mm /
950 mm /
1234 mm
950 mm /
1234 mm
Maximum short-term effort
67 tons
Power consumption
15 kW
Overall
dimensions of the press, L/W/H
dimensions of the press, L/W/H
2004 mm /
1000 mm /
1290 mm
1000 mm /
1290 mm
Maximum short-term effort
110 tons
Power consumption
22 kW
Overall
dimensions of the press, L/W/H
dimensions of the press, L/W/H
2692 mm /
1350 mm /
1525 mm
1350 mm /
1525 mm
This equipment can be used in factories producing auger equipment, augers for drilling rigs, screw conveyors
Machine for manufacturing screw pile blades, GP-20T
Machine for the production of auger spiral GP-60T
Machine for the production of auger spiral GP-30T
Machine for the production of auger spiral GP-100T
Machine for manufacturing screw pile blades, GP-20T
Maximum short-term effort
20 tons
Network voltage
380 V
Power consumption
3 kW
Outer diameter of the coil
not limited
Maximum flange height
300 mm*
Maximum flange thickness
2 mm - 12 mm
Maximum flange pitch
(with standard equipment)
(with standard equipment)
not limited
Overall dimensions of the press, L/W/H
1656 mm / 803 mm / 1138 mm
Overall dimensions of the control unit, L/W/H
710 mm / 702 mm / 1162 mm
Weight of the assembled unit
no more than 1500 kg
Working pressure
in the hydraulic system
in the hydraulic system
16 mPa
Maximum pressure
in the hydraulic system
in the hydraulic system
21 mPa
*the geometry of the screw thread depends on the tooling installed in the matrix
Machine for manufacturing screw pile blades, GP-30T
Maximum short-term effort
40 tons
Network voltage
380 V
Power consumption
7.5 kW
Outer diameter of the coil
not limited
Maximum flange height
440 mm*
Maximum flange thickness
2 mm - 20 mm
Maximum flange pitch
(with standard equipment)
(with standard equipment)
not limited
Overall dimensions of the press, L/W/H
1856 mm / 950 mm / 1234 mm
Overall dimensions of the control unit, L/W/H
971 mm / 801 mm / 1358 mm
Weight of the assembled unit
no more than 2100 kg
Working pressure
in the hydraulic system
in the hydraulic system
16 mPa
Maximum pressure
in the hydraulic system
in the hydraulic system
21 mPa
*the geometry of the screw thread depends on the tooling installed in the matrix
Machine for manufacturing screw pile blades, GP-60T
Maximum short-term effort
67 tons
Network voltage
380 V
Power consumption
15 kW
Outer diameter of the coil
not limited
Maximum flange height
550 mm*
Maximum flange thickness
2 mm - 32 mm
Maximum flange pitch
(with standard equipment)
(with standard equipment)
not limited
Overall dimensions of the press, L/W/H
2004 mm / 1000 mm / 1290 mm
Overall dimensions of the control unit, L/W/H
920 mm / 760 mm / 1370 mm
Weight of the assembled unit
no more than 3100 kg
Working pressure
in the hydraulic system
in the hydraulic system
16 mPa
Maximum pressure
in the hydraulic system
in the hydraulic system
21 mPa
*the geometry of the screw thread depends on the tooling installed in the matrix
Machine for manufacturing screw pile blades, GP-100T
Maximum short-term effort
110 tons
Network voltage
380 V
Power consumption
22 kW
Outer diameter of the coil
not limited
Maximum flange height
680 mm*
Maximum flange thickness
2 mm - 50 mm
Maximum flange pitch
(with standard equipment)
(with standard equipment)
not limited
Overall dimensions of the press, L/W/H
2692 mm / 1350 mm / 1525 mm
Overall dimensions of the control unit, L/W/H
1260 mm / 763 mm / 1508 mm
Weight of the assembled unit
no more than 8000 kg
Working pressure
in the hydraulic system
in the hydraulic system
25 mPa
Maximum pressure
in the hydraulic system
in the hydraulic system
29 mPa
*the geometry of the screw thread depends on the tooling installed in the matrix
Why choose us
We offer the best service, high quality of our products, as well as full support throughout the entire course of our cooperation.
We produce
Let's assemble and launch
We will deliver
We train
We find out your wishes, plans and needs of your production. We conclude an official contract. We will design and install the machine according to your requirements.
Installation and commissioning works are carried out by qualified specialists from our team.
We will ship the finished equipment strictly within the agreed time frame. We will ensure its timely and careful delivery to your facility.
We will teach your specialists to work on new equipment, including CNC, and use software
A few more words
about our company
about our company
The only plant in the CIS countries that directly produces machines for the manufacture of screw spirals. Our plant offers a profitable solution for enterprises that use screw spirals or produce screws for sale. The equipment we produce allows you to significantly save costs and labor costs, increasing the profitability of production.
Eurasian Plant
Construction Equipment -
Construction Equipment -
We strictly adhere to high quality standards, focusing on strict international requirements
We minimize your future expenses by supplying machines for the production of screw spirals without intermediaries
More than 3,968,000 augers have been created on our machines
This equipment can be used in factories producing auger equipment, augers for drilling rigs, screw conveyors
Hardened dies with automatic lifting mechanisms for the production of both straight and conical screw threads
Machine bed
with 5-fold safety margin
with 5-fold safety margin
Oil station with Italian components
Overhead crane with a lifting capacity of 200 kg, for easy operation with heavy augers
CNC control SIEMENS
Screw turns
Solid drawn screw spiral
Screw products according to the customer's specifications
Having a scientific and production base, modern equipment, many years of experience in manufacturing augers, we will manufacture any specialized products in accordance with your criteria
We produce screws with thickness from 2 to 50 mm in the shortest possible time on our own professional equipment. The outer and inner diameter is not limited. Ideal repeatability and geometry is guaranteed.
Using our own equipment in the shortest possible time.
We will develop design documentation and implement a project of any complexity on a turnkey basis.
Countries to which we export our products
Frequently asked questions
No, the equipment can be configured individually - according to the customer's technical specifications.
No. The cost of the equipment is taken into account when calculating the final price of the equipment.
We ourselves are engaged in technical maintenance and repair of the equipment that we produce. If necessary, we will conduct training for your technical personnel.
Our products are delivered worldwide, without territorial restrictions.
We process all requests promptly. All equipment is in stock, shipment within 5 days from the date of payment.
We process all requests promptly. All equipment is in stock, shipment within 5 days from the date of payment.
Fill out the form and our manager will contact you shortly
Fill out the form and our manager will contact you shortly
Fill out the form and our manager will contact you shortly
Fill out the form and our manager will contact you shortly
Fill out the form and our manager will contact you shortly
Fill out the form and our manager will contact you shortly